Skip to the content
Pete Yates Painting and Decorating

Service

Tape and Jointing for Plasterboard Walls and Ceilings

Tape and jointing means taping and filling the joints between plasterboard sheets, then sanding them smooth. Pete does this so new or repaired plasterboard walls and ceilings are ready for decorating. The work comes from one sole trader in Bognor Regis, who covers towns across West Sussex.

Plasterboard goes up in sheets, and the lines where the sheets meet have to be dealt with before a wall or ceiling can be decorated.

This page explains how that work runs and what to expect. General facts are attributed to named sources such as Dulux, Festool and HSE, and they are context for you rather than a description of Pete's own methods.

What happens to the joints between sheets?

Each joint is taped and filled, then sanded smooth. The aim is a new or repaired plasterboard wall or ceiling that is ready for decorating.

It is a preparation job, and Pete treats preparation as work in its own right.

Why is sanding part of the job?

Dulux guidance says flaws should be sanded or filled before colour goes on, so smooth joints matter to the finish.

Sanding makes dust, and Festool describes the principle of connecting a sander to an extractor that captures dust at the tool. Pete offers dustless sanding for this reason.

What happens once the joints are done?

Decorating follows, whether that is interior painting or wallpapering. The last step of any job is a look round the finished work with Pete.

The exact steps depend on the property, so describe what you have when you get in touch.

Questions

Which walls and ceilings need their joints finished?

New or repaired plasterboard walls and ceilings do. Wherever sheets meet, the joint is taped and filled, then sanded smooth so the surface is ready for decorating.

What are the stages of the work?

There are three: taping the joint, filling it, and sanding it smooth. Each stage leads to the next, and the aim is a surface that is ready for decorating when the work is done.

Why do joints get sanded smooth?

Dulux guidance says flaws should be sanded or filled before colour is applied. A joint left rough is the kind of flaw sanding is meant to remove, so the decorating that follows sits on an even surface.

Does sanding plasterboard joints create a lot of dust?

Sanding makes dust, which is why dust extraction exists. Festool describes a sander connected to an extractor that captures dust at the tool. Pete offers dustless sanding, so most of the dust is collected as the work is done.

When is tape and jointing not the right service?

When the problem is a small cracked or uneven area on an existing plaster wall, patch plastering is the service that applies. Describe what you can see when you ring, and Pete can say which one suits.

Can new plasterboard be painted straight after jointing?

Dulux says new plaster can take up to 4 weeks to dry completely, and describes a mist coat for new plaster. That guidance is about plaster, so ask Pete how it relates to your plasterboard and joints.

Does jointing leave a wall ready for wallpaper?

The aim is a surface ready for decorating, and wallpapering is one form of decorating that Pete offers. Walls are prepared first so that paper sits flat and the joins are neat.

Where does jointing sit in the order of a job?

It belongs to the prepare-the-surfaces step. Pete discusses the project and assesses the work first, then prepares the surfaces, which includes the joints, before the decorating is completed and reviewed.

Who does the jointing and the decorating?

Pete does both, as a sole trader. The person who prepares the joints is also the person who paints or papers the wall afterwards, and you deal with Pete from the first call to the final look round.

Does older paint near a joint raise any safety issue?

Where a repaired joint meets older paintwork, HSE guidance on lead is worth knowing. Lead pigments were widely used in paint until the 1960s, and HSE says sound paintwork should be left alone.

Contact

Request a Quote

Call Pete on 07472 311 520 or fill in the enquiry form. Include your town or postcode, the service you need and a few details about the project.

07472 311 520

pdyates3@yahoo.co.uk

Bognor Regis, West Sussex

Your details go to Pete. He will be in touch about your job.

Can't get through? Send the form and your details go to Pete.